home about us cad drawings contact distributors site map
E SERIES   |   A SERIES   |   CHEMIFIT   |   STANDARD TUBING   |   CLEAN TUBES   |   MULTI-LAYER TUBES   |   THERMOPLASTIC HOSES

 

Thermoplastic Hoses catalog download
Features of Nitta Moore thermoplastic hoses
  • Clean and Eco-friendly
    Smooth inner surface of the plastic hoses keeps the operating oil clean.
  • Piping on Site
    With the one-touch coupling "CAMPUCKA" or assembly tool "Mark 10," it is easy to adjust length on site.
  • High Durability
    They are highly durable against impact pressure and repeated bending, because of the synthetic fiber reinforcement.
  • High Abrasion Resistance
    They have high abrasion resistance because special polyurethane resin is used as the cover material.
  • Light Weight
    They weigh only about a quarter to half that of rubber hoses.
  • Compact Piping
    Small outer diameter enables piping in small bending radius.

  Check the following usage conditions before ordering.
  1. Type and volume of working fluid
  2. Working pressure (maximum working pressure and maximum impact pressure: MPa)
  3. Working temperature range (temperature of fluid and environment: °C)
  4. Bending radius of hose (minimum bending radius: mm)

  Based on the above conditions, please follow the steps below.
  1. Select the type of hose (A) and the inner diameter (D).
  2. Indicate the length (L) of hose assembly. (Use the length between the edges of two couplings.)
  3. Select types and materials of couplings (B and C) and adaptor (E).
  4. Specify if guard spring and other accessories (F) are required. (See pg. 67 of downloadable PDF for accessories.)

 

 

 

 

 
HOME | ABOUT US | PRODUCTS | CAD DRAWINGS | CONTACT US | DISTRIBUTORS | SITE MAP
© Nitta Moore - All Rights Reserved

site design by - Aqueous Designs